How to wire AEM MAP Sensor to Supra TT (AEM EMS)
Cut the 3 wires going to your factory MAP Sensor (located on your intake manifold)
Wiring is as follows:
CAR HARNESS_____________MAP SENSOR
Blue/Red_________________Red____________5 Volts
Brown/Black*_______________Black__________Ground
Black/Yellow_______________Green__________Output
* on the 97-98 Supras the Ground wire is White/Black
This applies for both 3.5BAR and 5BAR map sensors from AEM.
__________________
Kirk R.
1995 Supra Hardtop - 6SP/GT4276/AEM EMS/1000CC/HKS 272
Last edited by Kirk; 07-26-2009 at 12:26 PM..
|
