Complete Fuel Injector Cleaning & Flow Testing
Process:
- Injectors bodies are cleaned, visual inspected, and numbered.
- Injector coils are now tested for resistance, shorts, and current draw.
- Perform leak test, spray pattern, and flow rate testing on our ASNU flow bench. Record the results.
- Remove filter baskets, o-rings, and pintle caps. Bead-blast any loose paint and rust from the metal injector body.
- The injectors are placed in our first ultrasonic cleaning tank to remove and any particles, dirt, etc for 5-10 minutes.
- Into a second ultrasonic tank they go, they are now cycled on and off allowing the ultrasonic energy to dislodge any particles and build-up inside the injectors for 15-20 minutes.
- A high pressure back-flush is done to remove any particles inside.
- Install new filter baskets, o-rings, and pintle caps. (as required)
- Back to the flow bench for retesting of spray pattern, flow rate, and leak checking. This test data is also recorded
- (If requested) Prepare a comprehensive test report with before and after test data. The injectors are then packed along with the old parts for return
Full Service (Ultrasonic Clean and Flow)
- Top Feed - $19.99/each
- Side Feed - $24.99/each
Flow Only (no parts replaced)
- All Injectors - $9.99/each
Injector Parts Only
- DIY Injector Rebuild Kits starting at $14.99
We service injectors for the following applications:
* Outboard
* Marine
* Automotive
* High Performance Automotive (Up to 4000cc injectors! No injector too big!)
* Motorcycles
* ATVs
Feel free to visit our website for more information regarding our fuel injector servicing. You may contact us at 813-443-0531 or at
sales@theboostlab.com!
Fuel Injector Service Pricing
